This is the newest generation Reagent frame...
It may look very similar to the old Regaent frame but every curve and joint has been re-assesed, also a new manufacturing jig has been produced to make the frame squarer. Just looking at the frame you can see that there is a dramatic increase in quality over what was already one of the top street/flatland frames availale.
The frame is made from 6061 T6 Aluminium and requires the new 32mm bearing system (For compatability click here). The only change you will need to make, to convert your existing hub to fit this frame, is to change the bearings and the outer bearing spacer from 6mm to 5mm (exception is hubs fitted with Kris Holm Moment cranks, these require 6mm spacers).
- Size: 20"
- Length of seat tube: 250mm
- Material: Aluminum 6061 T6
- Color: White, black
- Inside diameter seat tube: 27.2mm (= Seat post diameter)
- Outside diameter seat tube: 31.8mm (= Clamp inside diameter)
- Diameter Bearing holder: 32mm (= Bearing outside diameter)
- Bearing pitch: 100mm (center - center)
- Weight: 610g (incl. bearing holders and bolts)
- Comes including bearing housing and screws
These frames will only run 32mm (22-32-14RS) bearings, you will need to convert your hub to 32mm bearings to fit this frame. Bearing set here
Bearing pitch: Bearing center to bearing center.
| Shipping weight: | 0,60 kg |
