The Nimbus VCX is taking over from the where the Excellent Nimbus Venture II crank left off.
The Nimbus VCX crank has been designed from the ground up. Nimbus have used the data collected from the Nimbus Venture II crank to produce a better all round design. The design has then been run though an Finite Element Analysis (FEA) program to see how they behave under extreme conditions. The VCX cranks are slightly wider than the Venture II's and have a smaller radius on the hub end, making them better for rolls and urban riding. The VCX is only available in ISIS interface. If you are fitting these cranks to a Nimbus ISIS hub you will need 6mm spacers to get the best fit. This may vary for other hub manufacturers and the age of the hub
The VCX+ offer not just two crank lengths, but three!
- Axle System: ISIS
- Material: Aluminum 6061 T-6
- Color: Polished
- Length: 100mm + 125mm + 150mm
- Q-Factor: No
- Weight (pair): 454g
- Sold in pairs
|Shipping weight:||0,50 Kg|